• Gypsum and Fibre-cement Boards
• Concrete Soffits and Overheads
FEATURES
• Superior Strength and Durability
• Excellent Resistance to Hairline Cracks
• Outstanding adhesion to Water-based Paint System
• Very Good Alkali Resistance
• Easy and Convenient to use - readily mixed with cement
PRODUCT PREPARATION
• Sieve the white or gray cement to eliminate agglomerates and lumps.
• Mix 1 part MONDO Skimcoat SK-2 with ½ to 1 part of sieved cement by volume. While mixing MONDO Skimcoat SK-2 , add the cement by increments until it is evenly distributed resulting in a homogeneous lump-free mixture.
• Use an electric mixer in order to ensure a homogenous lump-free mixture.
• Do not add water while mixing or after the mixture is achieved.
APPLICATION
• Light water misting of the concrete surface is recommended before applying the MONDO™ Acrylic Skimcoat SK-2 cement mixture.
• Allow a minimum of 4 hours depending on the thickness and atmospheric conditions before applying the desired painting system or wallpaper.
APPLICATION DATA
Application Method : Clean Stainless Steel Trowel
Thinning : Not recommended; use as is
No. of coats : 1-2 Recommended DFT : 0.50- 1.00 mm per coat
Practical Coverage : 38-40 sq. m @ 1 mm DFT per 25kg MONDO™ Acrylic Skimcoat SK-2 + 25kg sieved cement
Coating Interval : 30 minutes
Drying Time : 0.50-1hour
Clean-up : Clean water
Pack Sizes : 5kg and 25kg pails
Shelf Life : One year when stored in dry and cool conditions
STORAGE AND HANDLING
• Keep container closed when not in use.
• Store in a cool, dry and well-ventilated space.
• Do not transfer contents to other containers for storage.
• In case of spillage absorb with inert materials such as sand
SAFETY PRECAUTIONS
• Temperature range for use 5°C to 40°C
• Immediately clean tools with water before product dries
• In hot weather conditions, protect the finish surface from drying out by lightly misting the surface.
• Do not immerse the product.
SURFACE PREPARATION
• Ensure that the surface is structurally sound and free of dust, oil, laitance, paint, curing compound, algae and mildew.
• Scrape off loose material and dust with a wire brush.
• Remove algae and mildew with an appropriate cleaner and wash with soap and water.
